Sparta White Tilt + Turn 40mm Locking

Technical:

• All lockable with 1 key
  
• 7mm x 7mm x 32mm long spindle
• Long spindle that can be cut-down to suit any length
• 43mm between Centre of screw holes
• 10mm diameter fixing lugs
• Aluminium swivel cover plate to conceal screw fixings (supplied)
• Fits in seconds by removing/reinstalling 2 x screws

Fitting Guide:
1.Most Tilt and Turn handles can be fitted without too much difficulty. The fixing screws will be obscured with either cover caps or, in most cases, a cover plate.
2.First turn the handle horizontally 90 Deg then remove cover caps with a sharp object or slightly lift and turn the cover plate to reveal the screw fixing positions.
3.With a screwdriver unfasten the screws to remove the handle. Measure the old handle spindle against your new handle and using a hacksaw cut the spindle of your new handle to the same length.